Ultimate Power Electronics + MATLAB Simulink Course Bundle

What you'll learn:

• Understand Definition of Power Electronics
• Realize different applications of Power electronics
• Know different types of Converters
• Know different Categories of Power Electronic Devices
• Understand different Losses associated with Power Electronics
• Difference between Ideal and Practical Switch
• Understand Different factors when selecting the Power Electronic device
• Understand how Diode Works
• Understand the Diode V-I Characteristics
• Learn about Different Types of Diodes
• Learn how a Thyristor works
• Understand Thyristor V-I Characteristics
• Understand Different operating states of Thyristor
• Know the Latching and Holding Current of Thyristor
• Understand different Types of Thyristor
• Learn how Fully Controlled Switch works
• Understand different Types of Fully Controlled switches
• Understand Why GTO is the King of Power Electronics
• Understand how Rectifier works
• Learn Different Types of Rectifiers for Single Phase
• Learn about Half Wave Rectifier R load for both controlled and uncontrolled
• Learn about Half Wave Rectifier R-L load for both controlled and uncontrolled
• Learn about Half Wave Rectifier R-L load for both controlled and uncontrolled with Free wheeling Diode
• Understand the Usage of Freewheeling Diode
• Understand the Principle of Firing angle
• Understand the Biphase Rectifier
• Understand the fully , half controlled and uncontrolled Bridge Rectifier
• Understand the Performance Parameters for Rectifier Circuit
• Learn about the Power Factor
• Learn about the Firing Circuit UJT
• Understand the Protection of Power Electronic devices Against Over-current,Over-Voltage and Transient state.
• Understand the Series and Parallel Diodes
• Learn the Isolation of Firing Circuit using Pulse Transformer
• Learn the Isolation of Firing Circuit using OptoCoupler
• Understand the definition of AC chopper
• Analyze the AC chopper R load circuit
• Learn the AC chopper L load circuit
• Analyze the AC chopper R-L series load circuit
• Understand the AC chopper R-L parallel load circuit
• Analyze the AC chopper Capacitive load circuit
• Understand the integral cycle control
• Learn how to use AC chopper in transformer tap changing
• Learn the applications and disadvantages of AC choppers
• Analyze the AC chopper loaded by AC Motor
• Definition of DC choppers
• Applications of DC choppers
• Understand step down DC chopper with R-load.
• Generation of duty cycle
• Step down DC chopper with R-L-E load
• Step up DC chopper R or R-L load
• Step up DC chopper with RE load
• Buck regulator
• Boost regulator
• Buck-boost regulator
• Definition of inverter
• Importance and applications of inverters
• Analysis of single phase half bridge R-load
• Analysis of single phase half bridge RL-load.
• Performance parameters of an inverter
• Analysis of single phase bridge R-load
• Analysis of single phase bridge RL-load.
• Understand the three phase inverters and obtaining the line voltages and phase voltages.
• Single pulse width modulation
• Multiple pulse width modulation
• Industrial inverters
• Sinusoidal pulse width modulatio

Requirements:

• Basics of electric circuits or you can join my Ultimate Power Electronics for Electrical Power Engineering course for complete electric circuits
• Passion to learn!

Description:

"Ultimate Power Electronics Course + MATLAB Simulink Course Bundle"

The only course bundle out there with everything you need to know about rectifiers, AC choppers, DC choppers, and inverters

First Course "Complete Rectifiers Course for Electrical Engineering" Worth $197

Throughout the course you will learn:

• Definition of power electronics circuit and its application.

• Different types of switches as uncontrolled switches, semi-controlled and fully controlled switches as diodes, thyristors, IGBT, Mosfet,.....

• Types and applications for different switching devices.

• Definition of the rectifier.

• Different single-phase rectifier circuits and their configurations.

• Half wave and full wave rectifier single-phase circuits in case of uncontrolled and in case of half and full controlled bridges.

All of these topics are in a step by step lessons with many solved examples.

Second Course "Complete AC Choppers Course for Electrical Engineering" Worth $197

Throughout the course you will learn:

• AC chopper circuits with R load.

• AC chopper circuits with L load, R-L parallel, and series load.

• AC chopper with capacitive load.

• Integral cycle control of AC chopper with example.

• AC chopper in transformer tap changing.

• AC chopper loaded by an AC motor with back e.m.f.

• Applications and disadvantages of AC choppers.

All of these topics are in a step by step lessons with many solved examples.

Third Course "Complete DC Choppers Course for Electrical Engineering" Worth $197

Throughout the course you will learn:

• Definition of DC choppers and applications of DC choppers.

• Generation of the duty cycle.

• Types of circuits used to step up or step down the DC voltage.

• Analyze the step-down DC chopper with R and R-L-E load,

• Analyze the step-up DC chopper with R, RL, and RE loads.

• Analyze a buck regulator, boost regulator, and buck-boost regulator circuits.

• Equations to get the minimum values of inductance and capacitance required for those circuits.

All of these topics are in a step by step lessons with many solved examples.

Fourth Course "Complete Inverters Course for Electrical Engineering" Worth $197

Throughout the course you will learn:

• Definition of the inverter.

• Importance and applications of inverters.

• Single-phase half-bridge R-load.

• Single-phase half-bridge RL-load.

• Performance parameters of an inverter.

• Single-phase bridge inverter R-load.

• Single-phase bridge inverter RL-load.

• Three-phase inverters and obtaining the line voltages and phase voltages.

• Single pulse width modulation.

• Multiple pulse width modulation.

• Sinusoidal pulse width modulation.

Fifth Course "Matlab Simulations in Power Electronics" Worth $197

Throughout the course you will learn:

The simulation using MATLAB of:

• Single-phase half wave controlled rectifier

• Single-phase bridge controlled rectifier

• Single-phase AC chopper with R and RL load

• DC-DC converter as a buck regulator

• Boost regulator

• Buck-Boost regulator

• Single-phase half-bridge inverter

• Single-phase bridge inverter

• Three Phase Inverter

All of these topics are in a step by step lessons with many solved examples.

If you've been looking for ONE COURSE BUNDLE with in-depth insight into the basics of power electronics, take this bundle.

Who this course is for:

• Anyone who is interested in understanding power electronics.
• Anyone who wants to know about different converters and how rectifiers work
• Beginner course for electrical engineering students and for those who want to gain knowledge about AC Choppers
• Electrical engineers and electrical power engineering students who want to learn about DC choppers
• Electrical engineers or electrical power engineers who want to learn more about inverters in power electronics.
• NEW AWS Certified Solutions Architect Associate 2021 SAA-C02
• Learn Ethical Hacking & Penetration Testing
• Serverless Application Development with AWS & Typescript
• Microsoft Azure Serverless for Busy .Net Developers

Course Details:

• 17.5 hours on-demand video
• 2 articles
• Full lifetime access
• Access on mobile and TV
• Certificate of completion

Ultimate Power Electronics + MATLAB Simulink Course Bundle udemy courses free download

Learn everything about power electronics for electrical engineering as rectifiers, AC and DC choppers and inverters.